CYTOHUMATE
АQUA

Intended for fish, shrimp, mollusks
and other aquaculture species

Organic Base of the Product pH 9–10

01

Humic Acids Aqueous solution of potassium and sodium salts 5% / 50 g/L

02

Fulvic Acid

03

Squalene C₃₀H₅₀

04

Iodine

Component	Content
Aqueous solution of potassium and sodium salts of humic acids	5% / 50 g/L
Total phosphorus, P	0.25%
Total nitrogen, N	0.072%
Total potassium, K	6,405.85 mg/L
Total calcium, Ca	1,386.83 mg/L
Total magnesium, Mg	149 mg/L
Total iron, Fe	522.13 mg/L
Total manganese, Mn	44 mg/L
Total zinc, Zn	109.25 mg/L
Total copper, Cu	146.25 mg/L
Total cobalt, Co	1.29 mg/L
Total chromium, Cr	1.2 mg/L
Hydrogen ion concentration	pH 9–10

WHAT CYTOHUMATE
AQUA PROVIDES

01

Into the Aquatic Environment

The product is added directly to the water body in accordance with the recommended rate.

02

Together with Feed

The product is evenly distributed in the dry feed before feeding.

Application Objective	Consumption Rate	Frequency
01 Stimulation of Fry Growth Acceleration of growth and development of aquaculture juveniles	1–1.5 ml/L of aquatic environment	Every 4 days
02 Live Weight Gain Acceleration of live weight gain by adult specimens	1–1.5 ml/L of aquatic environment	Every 4 days
03 Stimulation of Immunoresistance Increasing the body's resistance to adverse factors	1–1.5 ml/L of aquatic environment	Every 4 days
04 Reduction of the Adaptation Period Support of aquaculture species when housing conditions change	1–1.5 ml/L of aquatic environment	Every 4 days
05 Water Purification Application directly into the aquatic environment	2 ml/L of aquatic environment	Every 7–10 days
06 Application with Dry Feed To stimulate growth, live weight gain and immunoresistance	6 ml/kg of dry feed	Throughout the rearing period

Application Procedure

1

Determine the volume of water or weight of feed

Calculate the amount of the product in accordance with the selected application rate.

2

Measure the required amount

Use an accurate measuring container to observe the recommended dosage.

3

Apply the product

Add CYTOHUMAT AQUA directly into the water body or distribute it evenly in the feed.

4

Observe the frequency

Repeat the application in accordance with the objective and the regulations.

i

CYTOHUMAT AQUA is applied in two ways

The product is added directly to the aquatic environment or mixed into the feed.

CYTOHUMATE AQUA on Shrimp
in Southeast Asian Countries

CYTOHUMATE
aqua

TO ORDER

Product Composition